Settings, Con’t), Setting the speaker mode – Sierra Wireless HT-TXQ120 User Manual
Page 25: Dvd playback mode, Divx (r) registration, Sacd playback mode
ENG
SETUP
49
48
• Depending on PRO LOGIC and STEREO settings, the speaker mode may vary
(see page 54).
Signal outputs and frequency responses from the speakers will automatically be adjusted according to your speaker
configuration and whether certain speakers are used or not.
1
In Stop mode, press the
MENU
button.
2
Press the Cursor
button to move to
<Audio>
and then press the
ENTER
button.
3
In the
<SPEAKER SETUP>
, press the
ENTER
button again.
4
Press the Cursor
,
,
,
button to move to the desired speaker and then
press the
ENTER
button.
For C, SL, and SR, each time the button is pressed, the mode switches alternately as follows :
SMALL
➝
NONE.
For L and R, the mode is set to SMALL.
•
SMALL : Select this when using the speakers.
•
NONE : Select this when no speakers are connected.
Setting the Speaker Mode
Settings
(Con’t)
Some DVD-Audio discs contain DVD-Video as well as DVD-Audio.
To play back the DVD-Video portion of the DVD-Audio disc, set the unit to DVD-Video mode.
1
Press the EJECT button and then press the MENU button.
2
Press the Cursor
button to move to
<Setup>
and then press the
ENTER
button.
3
Press the Cursor
button to move to
<DVD TYPE>
and then press the
ENTER
button.
4
Press the Cursor
,
button to move to
<DVD VIDEO>
and then press the
ENTER
button.
Set steps 1 ~ 4 again if you want to switch to DVD AUDIO Play mode.
When Selecting DVD Play Mode:
•
DVD VIDEO : set to play the DVD video contents contained on a DVD audio disc.
•
DVD AUDIO : set to play the default DVD audio.
DVD Playback Mode
• DVD Play mode is set to DVD Audio as factory default setting.
• Powering off the main unit will automatically switch to the DVD Audio mode.
Please use the Registration code to register this player with the DivX (R) video on demand format.
To learn more, go to www.divx.com/vod.
DivX (R) registration
• Powering off the main unit will automatically switch to the SACD mode.
If the SACD is a HYBRID disc, you can play the disc in CDDA MODE as well.
1
Press the EJECT button and then press the MENU button.
2
Press the Cursor
button to move to
<Setup>
and then press the
ENTER
button.
3
Press the Cursor
button to move to
<SACD TYPE>
and then press the
ENTER
button.
4
Press the Cursor
,
button to move to
<SACD MODE>
and then press the
ENTER
button.
Set steps 1 ~ 4 again if you want to switch to CDDA Play mode.
•
SACD MODE : Set this mode to play SACD.
•
CDDA MODE : Set this mode to play CDDA contents included in a disc.
SACD Playback Mode
MOVE
ENTER
EXIT
RETURN
MOVE
ENTER
EXIT
RETURN
MOVE
ENTER
EXIT
RETURN
MOVE
ENTER
EXIT
RETURN
MOVE
ENTER
EXIT
RETURN
MOVE
ENTER
EXIT
RETURN
TXQ120(45~69P) ENG_CA 2007.3.15 9:38 AM Page 48