Sony BLU-RAY DISC BDP-N460 - Manual (Page 34)

34
To adjust the audio characteristics
1
Press OPTIONS during playback.
The options menu appears.
2
Select “Audio Settings” using M/m, and
press ENTER.
The “Audio Settings” screen appears.
3
Select an item using M/m, and press
ENTER.
The default settings are underlined.
4
Select or adjust the settings using </
,, and press ENTER.
To adjust any other items, repeat steps 3
and 4.
b
• The “Audio Filter” function does not work for
digital audio signals output from the HDMI OUT/
DIGITAL OUT (OPTICAL/COAXIAL) jacks.
• There may be little effect by changing the “Audio
Filter” setting depending on the disc or playback
environment.
To adjust the picture
1
Press OPTIONS during playback.
The options menu appears.
2
Select “Picture Quality Mode” using M/
m, and press ENTER.
The “Picture Quality Mode” dialog box
appears.
3
Select an item using M/m, and press
ENTER.
The default setting is underlined.
b
• Set the picture setting of your TV to ‘Standard’
before changing the “Picture Quality Mode”
settings.
• “Picture Quality Mode” is not available when the
connected TV is set to Theater Mode (page 16).
Adjusting pictures and sound
for videos
Items Details
AV SYNC
(short) 0 ~
120 msec
(long) Adjusts the gap between
picture and sound, by
delaying the sound
output in relation to the
picture output (0 to
120 milliseconds).
Audio Filter
(for analog
audio signals
only) • Sharp: Provides a
wide frequency range
and spatial feeling.
Normally select this.
• Slow: Provides
smooth and warm
sound.
DVD BD
Items Details
Standard Normally select this.
Brighter Room Select this for a brighter
room.
Theater Room Provides the optimum
video mode for a theater
room.