Sirius Satellite Radio SDST5V1 - Manual (Page 21)

21
3 Attach the Vent Mount to the
PowerConnect Vehicle Dock
using the provided screws .
4 Push the Vent Mount onto the
vehicle vent as shown (1) until
it hooks on the rear of the vent
louver (2) .
5 Rest the foot against the
bottom of the vent (2), and adjust the tilt of the Vent Mount by
repositioning the foot to a different adjustment hole (3) .
To remove the Vent Mount, push the mount into the vent . Then lift up until
disengaged from the rear of the vent louver, and remove the Vent Mount .
PUSH
Dash
Vent
Louver
Vent
Vent
Dash Dash
HOOKED
TILT
ADJUSTMENT
HOLES
FOOT
1 2 3