Sony CF-SW07 - Manual (Page 64)

Preparation
12 GB
Setting the clock
Setting the Local Time
Set the clock if “0:00” flashes in the display (i.e., when you installed the
batteries for the first time or after you reset the clock). Set the clock with
the radio turned off.
LOCAL time signifies the time for your time zone, while WORLD time is
the time for any other time zone in the world.
Clock adjustment is done in LOCAL time. Before setting the clock, refer
to the table on page 15 and check the time difference between your area
and the UTC (Coordinated Universal Time). Names of major cities and
their time differences from the UTC are preset in the unit’s memory.
1
If the radio is turned on, press POWER ON/OFF to
turn it off.
2
Hold down TIME SET and press ¿ or ÷ to choose a
city or the time difference between your local time and
the UTC.
When TIME SET is pressed, the clock display will automatically
switch to LOCAL time if WORLD time had been displayed.
The LOCAL indication flashes. Each
time you press ¿ or ÷, the time
zone indicator will move to the right
or left.
When you release TIME SET, LOCAL
indication will stop flashing and light
up. Your local time zone has been selected.
3
Press DST if your area is now under daylight saving
time.
s appears in the display.
If daylight saving time is not used in your area, or if s is already
displayed, skip this step.
ABC
1
DEF
2
GHI
3
JKL
4
MNO
5
PQR
6
STU
7
MY DW VOA BBC OTH
VWX
8
YZ
9
<> /
FM/
AM
ON/
OFF
POWER
0
a b
DISPLAY
AM BAND
LABEL EDIT
TIME SET HOLD
LOCAL/
WORLD
TIMERSTANDBY/
STANDBY TIME SET
STANDBY MEMORY
TIME SET
TIME DIFF
SW STATION CALL
JOG/
TUNE/
SCAN˚
DIRECT
ENTER
DST
ERASE
SLEEP
LIGHT
SYNC
SSB
EXE
POWER
ON/OFF
DST
TIME SET
¿/ч
–|¿/ч|+