Step1, Setting up the machine, Improper setup – Sony MFC-240C User Manual

Page 10

Advertising
background image

Setting Up the Machine

8

STEP1

4

Take out the ink cartridge.

5

Carefully remove the protective yellow cap (1).

Improper Setup

DO NOT touch the area shown in the
illustration below.

Note

If the protective yellow cap comes off when you
open the bag, the cartridge will not be damaged.

6

Install each ink cartridge in the direction of the
arrow on the label.
Take care to match the colour of the lock
release lever (1) with the cartridge colour (2),
as shown in the diagram below.

7

Lift each lock release lever and push it until it
clicks, and then close the ink cartridge cover.

Note

If the LCD shows Install Black,
Install Yellow

, Install Cyan or

Install Magenta

after you install the ink

cartridges, check that the ink cartridges are
installed properly.

1

1

2

M

brother

XXXX

Advertising