Sony Ericsson NSP-1 - Manual (Page 13)

13
Setup
2
Enter the same password as the one entered in step 1.
3
Click the “Send” button.
The password for the Admin Account is changed.
Setting/changing a password for a public
user account
This is the password for a user who accesses this unit from
the application software.
This user is allows to open the status page.
1
Enter the new password in the “Password” text box of
the “Public Account” column.
2
Enter the same password as the one entered in step 1.
3
Click the “Send” button.
The password for the Public Account is changed.
Setting/changing a password for status
user account
This is the password for a user who is allowed only to
access the status page.
1
Enter the new password in the “Password” text box of
the “Status User Account” column.
2
Enter the same password as the one entered in step 1.
3
Click the “Send” button.
The password for the Status User Account is changed.
Setting/changing a password for the root
account
This is the password to be used for performing
maintenance or making special settings such as creating
new application software. It is recommended that you
change the password for the root account when a security
may be a problem because the network is connected to
public networks, etc.
1
Enter the new password in the “Password” text box of
the “Root Account” column.
2
Enter the same password as the one entered in step 1 in
the “Confirmation” text box.
3
Click the “Send” button.
The password for the Root Account is changed.
When All of the Settings for All of
Pages Are Completed
Click the “Reboot” button on the last page where you made
the settings.
This unit is turned off and then is turned on again.
Settings made on each page are now valid.
When the Account Settings page is the last page where you
made settings, open a different page and click the
“Reboot” button on that page.
Note