Additional information, Precautions – Sony CMT-CP101 User Manual

Page 21

Advertising
background image

21

GB

Additional Information

Precautions

On operating voltage

Before operating the system, check that the operating
voltage of your system is identical with the voltage of
your local power supply.

On safety

• The unit is not disconnected from the AC power

source (mains) as long as it is connected to the wall
outlet, even if the unit itself has been turned off.

• Unplug the system from the wall outlet (mains) if it

will not be used for an extended period of time. To
disconnect the power cord (mains lead), pull it out
by the plug. Never pull the cord itself.

• Should any solid object or liquid fall into the

system, unplug the system and have it checked by
qualified personnel before operating it any further.

• AC power cord must be changed only at the

qualified service shop.

On placement

• Do not place the system in an inclined position.
• Do not place the system in locations where it is:

— Extremely hot or cold
— Dusty or dirty
— Very humid
— Subject to vibrations
— Subject to direct sunlight

• Use caution when placing the unit or speakers on

surfaces that have been specially treated (with wax,
oil, polish, etc.) as staining or discoloraion of the
surface may result.

On heat buildup

• Although the unit heats up during operation, this is

not a malfunction.

• Place the system in a location with adequate

ventilation to prevent heat build-up in the system.

If you continuously use this system at a large volume,
the cabinet temperature of the top, side and bottom
rises considerably. To avoid burning yourself, do not
touch the cabinet.
To prevent a malfunction, do not cover the ventilation
hole for the cooling fan.

On operation

• If the system is brought directly from a cold place

to a warm place, or is placed in a very damp room,
moisture may condense on the lens inside the CD
player. Should this occur, the system will not
operate properly. Remove the CD and leave the
system turned on for about an hour until the
moisture evaporates.

• When moving the unit, remove any disc that may be

on the disc tray.

If you have any questions or problems concerning
your system, please consult your nearest Sony dealer.

Notes on CDs

• Before playing a CD, clean the CD surface with a

cleaning cloth. Wipe the CD from the center out.

• Do not play a CD with tape, stickers, or adhesives

on any of its surfaces as this may damage the
system.

• Do not use solvents.
• Do not expose the CDs to direct sunlight or heat

sources.

• Disc with non-standard shapes (e.g., heart, square,

star) cannot be played on this system. Attempting
to do so may damage the system. Do not use such
discs.

Cleaning the cabinet

Clean the cabinet, panel and controls with a soft cloth
slightly moistened with mild detergent solution. Do
not use any type of abrasive pad, scouring powder or
solvent such as thinner, benzene or alcohol.

To save a tape permanently

To prevent a tape from being accidentally recorded
over, break off the cassette tabs from side A or side B
as illustrated.

If you later want to reuse the tape for recording, cover
the broken tab with adhesive tape.

Before placing a cassette in the tape

deck

Take up any slack in the tape. Otherwise the tape
may get entangled in the tape deck’s playing
mechanism and become damaged.

When using a tape longer than 90

minutes

The tape is very elastic. Do not change the tape
operations such as play, stop, and fast-winding etc.
too frequently. The tape may get entangled in the
tape deck’s playing mechanism.

Cleaning the tape heads

Clean the tape heads after every 10 hours of use.
Make sure to clean the tape heads before making an
important recording or after playing an old tape. Use
a commercially available dry-type or wet-type
cleaning cassette. For details, refer to the instructions
of the cleaning cassette.

Demagnetizing the tape heads

Demagnetize the tape heads and the metal parts that
have contact with the tape after every 20 to 30 hours
of use with a commercially available demagnetizing
cassette. For details, refer to the instructions of the
demagnetizing cassette.

Break off the
cassette tab

Additional Information

Advertising