SiPix StyleCam DV100 - Manual (Page 12)

9
5. Press the Navigation left button to back out of the sub-menu, and you will be able to
preview the scene through LCD screen. A self-timer icon will display on the left side of
the LCD screen.
6. Set the camera on a flat surface and press the Shutter button. The red LED will begin to
blink.
7. You have 10 seconds to position yourself before the camera takes a picture.
Setting the Capture Mode
You can configure the Capture mode to your desired setting to take digital video and digital still
images. The features and setup procedure is similar for both video and still image modes. Please
follow the instructions below to configure your StyleCam DV100 Capture mode.
Note: When you want to exit a current menu at any time, simply press the Navigation left button
to back out of the screens.
From the Capture main menu use the Navigation buttons to highlight either “VIDEO” or “STILL
IMAGE” and then press the OK button. On the next screen, press the Navigation right button,
and the following sub-menu will appear:
The following are the options for video and still
image:
• Language
• Quality
• White balance
• Self-timer
• Time/date
• Format
• Anti-flicker
• Time/date stamp (still image only)
LANGUAGE
From the sub-menu, highlight “LANGUAGE” and
press the Navigation right button. You will see a list
of the available languages.
There are six languages you can choose from:
English, German, French, Spanish, Italian, and
Traditional Chinese. Use the Navigation up/down
buttons to highlight your selection and press the OK
button.
QUALITY
From the sub-menu, highlight “QUALITY” and press
the Navigation right button. You will see a list of the
available resolutions.
Use the Navigation up/down buttons to highlight your
selection and press the OK button.
• Superfine = 640x480
• Fine = 320x240
• Economy = 160x120