Sony DAV-HDZ485 - Manual (Page 21)

21 US
Ge
tting Star
te
d
This connection sends an audio signal to the unit from the TV. To listen to TV sound via the system,
perform this connection.
Method 1: Audio cord (D) connection
This is the basic connection and sends an analog audio signal.
Method 2: Digital optical cord (E) or digital coaxial cord (F) connection
When the TV has a digital optical or coaxial output jack, you can improve sound quality by connecting
with a digital optical or coaxial cord in addition to an audio cord connection.
Note
• The system can accept both digital and analog signals. Digital signals have priority over analog signals. (COAXIAL
has priority over OPTICAL.) If the digital signal ceases, the analog signal will be processed after 2 seconds.
Tip
• You can connect another component, such as a VCR, digital satellite receiver, or PlayStation, to the TV/VIDEO
(AUDIO IN R/L) jacks or DIGITAL IN OPTICAL/COAXIAL jacks instead of the TV.
Connecting the TV (Audio connection)
CENTER
SUBW OOFE R
FRONT R
FRONT L
SUR R
SUR L SPE AKE R
HDM I OU T
SPE AKE R
COAXIAL 75 FM
ANTE NNA
DMP ORT
DC5V
0.7A MAX
DIGITAL IN
COAXIAL
OPTICAL
TV/V IDEO
AUDIO IN
P B /C B
P R /C R
Y
L
R
VIDE O
OUT
TV/V IDEO
COM PON ENT V IDEO OUT
EZW -T100
To the digital optical out
jack of the TV.
To the audio out jacks of
the TV.
D Audio cord (not
supplied)
E Digital optical cord (not
supplied)
To the digital coaxial out jack
of the TV.
F Digital coaxial cord (not
supplied)