Sharp Aquos LC 37HT3U - Manual (Page 17)

2
1 3
Preparation
15
Hex key
Short screw
1 Insert the stand into the openings on the
bottom of the TV.
2 Insert and tighten the 4 long screws into
the 4 holes on the rear of the TV.
Hex key
Long screw
Soft cushion
NOTE
• To detach the stand, perform the steps in reverse order.
1 Set the post for the stand unit onto the
box.
2 Attach the base to the post.
3 Insert and tighten the 4 short screws into
the 4 holes on the bottom of the base.
Confi rm that there are 8 screws supplied with
the TV.
Attaching the stand
• Before attaching (or detaching) the stand, unplug the AC cord from the AC INPUT terminal.
• Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being
damaged.
CAUTION
• Attach the stand in the correct direction.
• Be sure to follow the instructions. Incorrect installation of the stand may result in the TV falling over.
LC-42HT3U
Short screws ( g4)
(Used in step 2)
Long screws ( g4)
(Used in step 3)