Sony VPH-D50QM - Manual (Page 25)

25
(EN)
I N P U T - A
V I D E O : V I D E O
I N P U T - A
I N P U T - B
S W I T C H E R : S W ' E R 1 - 1
INPUT
SELECT
PIC
CTRL
INPUT
SETTING
SET
SETTING
INPUT
INFO. SEL: SET: ENTER EXIT: MENU
INPUT
SELECT
PIC
CTRL
INPUT
SETTING
SET
SETTING
INPUT
INFO. SEL: SET: ENTER EXIT: MENU
D E O
V I D E O : V I D E O
I N P U T - S - V I D E O
I N P U T -
S W I T C H E R : S W ' E R 1 - 1
I N P U T - A
V I D E O : V I D E O
I N P U T - A
I N P U T - B
S W I T C H E R : S W ' E R 1 - 1
INPUT
SELECT
PIC
CTRL
INPUT
SETTING
SET
SETTING
INPUT
INFO.
SEL: SET: ENTER EXIT: MENU
The INPUT SELECT menu is used for selecting the
input signal.
Items that can be selected are highlighted in green.
You cannot select the items indicated in white.
VIDEO
Selects signal input from the VIDEO IN or S VIDEO
IN (or Y/C IN) connectors.
Select VIDEO or S-VIDEO in the pop-up menu.
INPUT-A
Selects signal input from the INPUT A connectors.
Notes
• When the PC-1271/1271M Signal Interface Switcher is
connected to the INPUT A connectors using the 5BNC
cables, INPUT-A cannot be selected.
• If the setting of INPUT-A in the SET SETTING menu is
incorrect, the picture may be distorted.
For details, see page 31 (EN).
INPUT-B
Selects signal input from the connectors on the signal
interface board (not supplied) installed to the INPUT B
section.
Notes
• When the PC-1271/1271M Signal Interface Switcher is
connected to the projector via the IFB-40 Signal Interface
Board installed to the INPUT B section, INPUT-B cannot
be selected.
• If the setting of INPUT-B in the SET SETTING menu is
incorrect, the pictue may be distorted.
For details, see page 31 (EN).
SWITCHER
When the PC-1271/1271M Signal Interface Switcher
is connected to the projector, selects signal input from
the switcher.
You can select SW'ER1-1 to SW'ER2-8 in the pop-up
menu. They are always displayed in green even when
no signal is input.
Note
SWITCHER can be selected only when the IFB-40 Signal
Interface Board is installed to the INPUT B section, or when
5BNC MODE in the SET SETTING menu is set to ON.
I N P U T - A
V I D E O : V I D E O
I N P U T - A
I N P U T - B
S W I T C H E R : S W ' E R 1 - 1
INPUT
SELECT
PIC
CTRL
INPUT
SETTING
SET
SETTING
INPUT
INFO. SEL: SET: ENTER EXIT: MENU
INPUT
SELECT
PIC
CTRL
INPUT
SETTING
SET
SETTING
INPUT
INFO. SEL: SET: ENTER EXIT: MENU
I N P U T - A
V I D E O : V I D E O
I N P U T - A
I N P U T - B
S W I T C H E S W E R 1 - 1
S W E R 1 - 2
S W E R 1 - 3
S W E R 1 - 4
The INPUT SELECT Menu
Adjustments and settings using the men
u