Samsung HT-P50 - Manual (Page 9)

ENG
15
• If you connect the HDMI and Component outputs (P R , P B , Y) at the same time, the Component output
resolution changes automatically to the designated HDMI resolution.
Example: If the TV connected to HDMI can only support up to 480p, the HDMI and Component outputs are all
converted to 480p, even if you select the resolution to 1080i.
• Since this product has an embedded Video Upscaler function with Faroudja DCDi technology, it can enhance a
576i(480i) DVD resolution output to 480p/720p/1080i.
• You do not have to make separate adjustments, since the Home Theater and TV will be automatically adjust
themselves to the optimal resolution and aspect ratio if connected to HDMI. (If the TV is an HDTV and has an
HDMI Input jack, output is automatically converted to 1080i resolution (if supported by the TV).)
• Audio will not be output if decoder is not embedded in TV during 5.1 channel disc playback.
• Component output will give video in ‘480p’ mode only during DVD disc playback applied with Macrovision.
• Macrovision scrambles the analog video output to prevent illegal recording. Accordingly, if you are using HDMI
only, Macrovision permits output of 480p/720P/1080i, but is limited to 480p only if you are using Component.
• When both HDMI and COMPONENT jacks are connected, COMPONENT video is not displayed.
• See your TV owner's manual for more information on how to select the TV's Video Input source.
Note
16
CONNECTIONS
What is HDMI (High Definition Multimedia Interface)?
This device transmits DVD video signal digitally without the process of converting to
analog. You can get sharper digital pictures by connecting the video to the TV using an
HDMI connection cable.
HDMI Function
HDMI Audio ON/OFF function
• The audio signals transmitted over the HDMI Cable can be toggled
ON/OFF.
Press the HDMI AUDIO button on the remote
control.
• This toggles “ AUDIO ON ” and “ AUDIO OFF ” on the display.
• AUDIO ON : Both video and audio signals are transmitted over the
HDMI connection cable, and audio output is through the TV
speakers only.
• AUDIO OFF : Video is transmitted over the HDMI connection cable
only, and audio output is through the home theater speakers only.
• The default setting value of this product is HDMI AUDIO OFF.
• HDMI AUDIO is automatically down-mixed to 2ch for TV
speakers.
• If you turns off and on, or switch functions when the HDMI
AUDIO is set to ON, the HDMI AUDIO is automatically set to
OFF.
Note
Resolution Selection
• This function allows the user to select screen resolution for HDMI and component output.
In Stop mode, press and hold the SD/HD button on the remote control.
• Resolutions available for the HDMI and component output (P R , P B , Y) are 480P, 720P and 1080i.
• If you connect the HDMI and Component outputs (P R , P B , Y) at the same time,
Component output resolution changes automatically to the designated HDMI
resolution.
• When both HDMI and COMPONENT jacks are connected, COMPONENT video is not
displayed.
Caution
Example: If the TV supports resolution up to 480p
Pressing the SD/HD button.
• A 480p video signal is output through the HDMI and component outputs (P R , P B , Y).
• If copy protection (Macrovision) is in place, output resolution is automatically
converted to 480p when you play the DVD through the Component outputs.
• For component video output, only 480P is supported.
Note