Savin Fax Option Type 1027 - Manual (Page 41)

Changing Key Operator Settings
173
8
Programming ISDN G3 Line
Optional ISDN Unit is required.
•This function must be set when you
connect the machine to an ISDN G3
digital line.
You can program the following items.
• Own Fax Number 1
• Own Fax Number 2
• Sub-address
⇒ p.50 “Sub-address”
Note
❒ Program Own Fax Number 1 as
your own digital number. Pro-
gram Own Fax Number 2 as anoth-
er digital number which occupies a
single line.
❒ You should program the Own Fax
Number 1.
❒ ISDN allows two or more termi-
nals (such as a fax machine and
digital telephone) to be connected
to a single line. These terminals are
identified by their sub-address
numbers. If the terminals connect-
ed to the line at a destination are
assigned sub-addresses, dialing a
sub-address allows you to direct
your fax message to a particular
terminal at the destination.
❒ Up to four digits (0 to 9999) are
available for a sub-address
AAAA
Press the
{{{{User Tools/Counter}}}} key.
BBBB
Press [Facsimile Features].
Facsimile Features menu is shown.
CCCC
Select [Key Operator Tools].
DDDD
Select [Program ISDN-G3 Line].
Note
❒ If "Program ISDN-G3 Line" is
not shown, press [
U U U U Prev.] or [T T T T
Next] .
RusC2FaxADEN-F_V4_FM.book Page 173 Monday, August 20, 2001 10:52 AM