Samsung HT-Z210 EN - Manual (Page 2)

4 connecting the video out to your tv
AUX IN 2
AUX IN 2
METHOD3
(supplied) METHOD2 METHOD1
METHOD 1 : HDMI
Connect the HDMI cable from the HDMI OUT jack on the back of the DVD Home Theater to the HDMI IN jack on your TV.
METHOD 2 : Component Video
If your television is equipped with Component Video inputs, connect a component video cable(not supplied) from the Component Video
Output (Pr, Pb and Y) Connectors on the back of the main unit to the Component Video Input Connectors on your TV.
METHOD 3 : Composite Video
Connect the supplied video cable from the VIDEO OUT jack on the back of the main unit to the VIDEO IN jack on your TV.
Resolutions available for the HDMI output are 480p, 720p,1080i/1080p.
This product operates in Interlace scan mode (480i) for Component Output.
After making the video connection, set the Video input source on your TV to match the corresponding Video
output (HDMI, Component or Composite) on your Home theater.
See your TV owner's manual for more information on how to select the TV's Video Input source.
If you use an HDMI cable to connect a Samsung TV to the main unit, you can operate the Home Theater using
the TV's remote control. (This is only available with SAMSUNG TVs that support Anynet+(HDMI-CEC).)
Please check the
logo (If your TV has an logo, then it supports Anynet+ function.)
M





Choose one of the three methods for connecting to a TV.
4 - English
5 connecting audio from external components
5 - English
6 listening to radio
Listening to Radio
Remote Control
Press the TUNER button to select the FM band.
Tune in to the desired station.
Automatic Tuning 1 : When the #,$ button is pressed, a preset broadcast station is selected.
Automatic Tuning 2 : Press and hold the ,,. button to automatically search for active broadcasting stations.
Manual Tuning : Briefl y press the ,,. button to increase or decrease the frequency incrementally.
Main Unit
Press the FUNCTION button to select the FM band.
Select a broadcast station.
Automatic Tuning 1 : Press the STOP (¦) button to select PRESET and then press the #,$ button to select the
preset station.
Automatic Tuning 2 : Press the STOP
(¦) button to select MANUAL and then press and hold the #,$ button to
automatically search the band.
Manual Tuning : Press the STOP
(¦) button to select MANUAL and then briefl y press the button to tune in to
a lower or higher frequency.
1.
2.
•
•
•
1.
2.
•
•
•
Connecting the FM Antenna
Connect the FM antenna supplied to the FM 75 Ω COAXIAL Jack.
Slowly move the antenna wire around until you fi nd a location where reception is good, then fasten it to a wall or other rigid
surface.
This unit does not receive AM broadcasts.
1.
2.
M

6 - English
AUX2 : Connecting an External Analog Component
Analog signal components such as a VCR.
Connect AUX IN 2 (Audio) on the Home Theater
to the Audio Out of the external analog
component.
Be sure to match connector colors.
Press the AUX button on the remote control to
select AUX 2 input.
You can also use the FUNCTION button on the main unit.
The mode switches as follows :
DVD/CD ➞ D.IN ➞ AUX 1 ➞ AUX 2 ➞USB ➞ FM.
You can connect the Video Output jack of your VCR to the TV, and connect the Audio Output jacks of the VCR
to this product.
1.
•
2.
•
M

AUX IN 2
AUX IN 2
Audio Cable (not supplied)
If the external analog
component has only one
Audio Out, connect either
left or right.
AUX1 : Connecting an External Component/MP3 player
Components such as an MP3 Player.
Connect AUX IN 1 (Audio) on the Home Theater to the Audio Out of the
external component/MP3 player.
Press the AUX button on the remote control to select AUX1 input.
You can also use the FUNCTION button on the main unit.
The mode switches as follows :
DVD/CD ➞ D.IN ➞ AUX 1 ➞ AUX 2 ➞USB ➞ FM.
1.
2.
•
AUX IN 1
Audio OUT
Audio Cable (not supplied)
OPTICAL : Connecting an External Digital Component
Digital signal components such as a Cable Box/Satellite receiver (Set-Top Box).
Connect the Digital Input (OPTICAL) on the
Home Theater to the Digital Output of the
external digital component.
Press the AUX button on the remote control to
select DIGITAL IN.
You can also use the FUNCTION button on the
main unit.
The mode switches as follows :
DVD/CD ➞ D.IN ➞ AUX 1 ➞ AUX 2 ➞USB ➞
FM.
1.
2.
•
AUX IN 2
AUX IN 2
Optical Cable(not supplied)
AUX IN 2
FM Antenna(supplied)