Sony IPELA SNC-RH124 - Manual (Page 78)

A
d
mini
s
tra
ting
t
he
Came
ra
Outputting Audio Linked to Alarm Detection — Voice alert Menu
78
Outputting Audio Linked
to Alarm Detection
— Voice alert Menu
Click in the Administrator menu to display
the Voice alert menu.
Use this menu to set the voice alert function to output
audio from the line output jack of the camera when an
alarm is detected by the sensor input or motion detection
function.
You can output the audio from the speaker connected to
the camera in synchronization with an alarm event
triggered by the sensor input or the motion detection
function.
The Voice alert menu consists of 3 tabs: Voice alert 1,
Voice alert 2 and Voice alert 3. You can configure an
individual audio file on each tab.
Note
Before using the voice alert function, you need to save
the audio file to the camera using the SNC audio upload
tool stored in the supplied CD-ROM.
For details on use of the SNC audio upload tool, see
page 105.
Voice alert 1, 2, 3 Tab
File
Displays the name of the audio file saved in the camera.
“Not uploaded” is displayed dimly if no audio file is
saved.
To delete the audio file saved in the camera, click
Delete.
Note
Before deleting an audio file, set Voice alert to Off.
Test
When an audio file is saved in the camera, you can check
it by playing it back.
Click Play to play back the audio file.
Voice alert
To use the voice alert function linked with the sensor
input or the motion detection function, select On.
Repeat
Select playback repeat time from 1 to 3.
Alarm
Select the alarm to be linked with the voice alert
function.
Sensor input 1: The external sensor that is connected to
sensor input 1 of camera I/O port.
Sensor input 2: The external sensor that is connected to
sensor input 2 of camera I/O port.
Sensor input 3: The external sensor that is connected to
sensor input 3 of camera I/O port.
Sensor input 4: The external sensor that is connected to
sensor input 4 of camera I/O port.
Tampering: An alarm that is triggered when the camera
detects vibration or shaking.
VMF: An alarm of the VMF detection function.
Motion detection: The alarm detected by the motion
detection function.
Click Detection to display Motion detection menu to
allow you to set the motion detection function
(page 82).
Notes
• If voice alert is actively linked with a different alarm
event while another voice alert is occuring, the first
voice alert is canceled and the second is output.
• If two or three audio files are set to be output
simultaneously linked with the same alarm event,
priority is given in the order Voice alert 1, 2 then 3.
• In the case where a preset position is specified in
Position at alarm in the Preset position menu, the
alarm event that occurs when the camera moves to the
preset position will be invalid.
Effective period
Set the period during which alarm detection is effective.
Always: Alarm detection is always effective.
Schedule: You can specify the period during which
alarm detection is effective.
Click Schedule, and the menu for the effective
period is displayed. (“Setting the Schedule —
Schedule Menu” on page 81)
OK/Cancel
See “Buttons common to every menu” on page 29.
Voice alert