Sharp UX-A255 - Manual (Page 36)

Operating the Answering Machine
34
To listen to the outgoing message
To listen to the outgoing message, follow Steps 1 and 2 of the above
procedure and then press . Note that the general outgoing message
cannot be erased. If you need to change it, simply repeat the recording
procedure.
Operating the Answering Machine
Activating the answering machine
To turn on the answering machine so that callers can leave messages, press
until the arrow in the display points to TAD. (TAD stands for
“Telephone Answering Device”.)
PLAY
RESOLUTION/
RECEPTION MODE
4
Press and speak into the handset to record a message.
•
The outgoing message can be up to 60 seconds long. While recording, the
display will show the time left to record.
5
When finished, replace the handset or press .
START/MEMORY
STOP
RESOLUTION/
RECEPTION MODE
♦
The outgoing message will play (you can stop playback by pressing
).
♦
It will not be possible to set the reception mode to TAD if an outgoing
message has not been recorded.
STOP
FAX TEL
TAD