Samsung ML-1640 Series - Manual (Page 29)

Maintenance_ 29
4. Holding both handles on the toner cartridge, thoroughly rock it from side
to side to evenly distribute the toner.
5. Locate the cartridge slots inside the machine, one on each side.
6. Unfold the toner cartridge handle and grasp it. Insert the cartridge in the
machine until it snaps into place.
7. Close the front cover. Make sure that the cover is securely closed. If the
cover is not firmly closed, printing errors may occur when you print.
If toner gets on your clothing, wipe it off with a dry cloth and wash
it in cold water. Hot water sets toner into fabric.
• Don't use sharp objects, such as a knife or scissors, to open
the toner cartridge package. You could damage the surface of
the toner cartridge.
• To prevent damage, do not expose the toner cartridge to light
for more than a few minutes. Cover it with a piece of paper to
protect it if necessary. Carefully insert or pull out the toner cartridge not to scratch
against the machine.
• Do not touch the green surface (or sky blue), the OPC drum,
with your hands or any other material. Use the handle on the
cartidge to avoid touching this area.
• Be careful not to expose the green surface (or sky blue), the
OPC drum, into light. This will cause damage to the OPC
drum. Cover the toner cartridge’s OPC drum with paper to
avoid damaging it from the light.
• Do not turn the toner cartridge over.
Average yield for a new toner cartridge is 1,500 standard pages in
accordance with the ISO/IEC 19752 standard. (Average yield for the
original toner cartridge supplied with the machine is 700 standard
pages.)