Samsung ML-1640 Series - Manual (Page 17)

Getting started_ 17
INSTALLING THE SOFTWARE
You have to install the machine software for printing. The software includes
drivers, applications, and other user friendly programs.
1. Make sure that your machine is connected to the computer.
2. Insert the Printer Software CD-ROM into your CD-ROM drive.
The CD-ROM should automatically run, and an installation window
appears.
If the installation window does not appear, click Start > Run. Type
X:\Setup.exe, replacing “X” with the letter which represents your drive
and click OK.
If you use Windows Vista, Windows 7 and Windows 2008 Server R2
click Start > All Programs > Accessories > Run, and type
X:\Setup.exe.
If the AutoPlay window appears in Windows Vista, Windows 7 and
Windows 2008 Server R2 click Run Setup.exe in Install or run
program
field, and click Continue in the User Account Control
window.
3. Click Next.
• The window above may slightly differ, if you are reinstalling the
driver.
• View User’s Guide : Allows you to view the User’s Guide. If your
computer does not have Adobe Acrobat, clicking on this button will
automatically install Adobe Acrobat Reader for you, and then open
the User’s Guide.
4. Select Typical, and then click Next.
5. After the installation is finished, a window appears asking you to print a
test page and to register yourself as a user of Samsung machines in
order to receive information from Samsung. If you desire, select the
corresponding checkbox(es) and click Finish.
The following procedure is based on the Windows XP operating
system. The procedure and popup window which appear during the
installation may differ depending on the operating system, the printer
feature, or the interface in use.
• If your machine does not work properly after the installation, try
to reinstall the printer driver. S ee Software section .
• During the printer driver installation process, the driver installer
detects the location information for your operating system and
sets the default paper size for your machine. If you use a
different Windows location, you must change the paper size to
match the paper you usually use. Go to printer properties to
change the paper size after installation is complete.