Samsung ML-1640 Series - Manual (Page 21)

Selecting and loading print media_ 21
z
LOADING PAPER
Loading paper in the tray
Load the print media you use for the majority of your print jobs in the tray.
The tray can hold a maximum of 150 sheets of 75 g/m
2 (20 lb bond) plain
paper.
1.
Grasp the paper input tray and pull it toward you to open. Pinch the rear
guide and pull it out to extend the tray
.
2. Prepare a stack of paper for loading by flexing or fanning them back and
forth. Straighten the edges on a level surface.
3. Load paper with the print side facing up. Make sure that all four corners
are flat in the tray.
Preprinted paper • Letterhead must be printed with heat-resistant ink
that will not melt, vaporize, or release hazardous
emissions when subjected to the machine’s fusing
temperature for 0.1 second. Check your machine’s
specification to view the fusing temperature, see
page 40.
• Letterhead ink must be non-flammable and should
not adversely affect printer rollers.
• Forms and letterhead should be sealed in a
moisture-proof wrapping to prevent changes during
storage.
• Before you load preprinted paper, such as forms
and letterhead, verify that the ink on the paper is
dry. During the fusing process, wet ink can come off
preprinted paper, reducing print quality.
Using photographic paper or coated paper may cause problems,
requiring repairs. Such repairs are not covered by Samsung’s
warranty or service agreements.
MEDIA TYPE GUIDELINES
Because the machine is very light, it may be moved when you use it;
for example, when opening/closing the tray or installing/removing the
toner cartridge. Be careful not to move the machine.
Pay attention not to overload paper. Paper overloading may
cause paper jams .