SMC Networks EZ-Stream SMCWMR-AG - Manual (Page 6)

Note: Please make sure that you successfully complete this
section before proceeding to Setup.
Step 1: Start your host PC and ensure that your wireless Access
Point/Router and network card(s) are functioning properly.
Step 2: Launch the Media Server
Application by going to Start ->
Programs -> EZ-Stream
Universal Wireless Media Server ->
Media Server.
Step 3: Click the [Shared Folders]
tab. Click the [Add] button to share
a new directory. Note that the
Media Server will automatically
share the sub-directories as well.
Step 4: If the computer has more
than one network adapter, go to
the [Network Connection] tab and
verify that the selected Network
Connection and corresponding
IP Address are correct. The Media
Server software must be operating
on the same network as the
SMCWMR-AG. If the incorrect
network connection is selected,
highlight the appropriate one,
and press [Yes] when asked to
restart the application.
English
English
Step 5: Go to the [Internet Radio] tab. Click the [Add] button to
specify new radio stations. You will be asked to enter a name for
the Radio Station and the complete URL (or internet address).
Step 6: Go to the [Update] tab. This tab allows you to specify
how often you want your host PC to check for new files and in
turn, update your SMCWMR-AG. You can also manually press
the [Update] button at any point in time to make sure the
SMCWMR-AG has the latest file listing of your multimedia
content.
Step 7: Go to the [General] tab.This
tab allows you to specify:
a) [When I start my computer]
When [Automatically start
Media Server] is selected,
this will run the server
application automatically
upon boot-up.
b) [Search for MediaLink]
Pressing this button
initiates a network scan to
confirm that connectivity
between the host PC and
the SMCWMR-AG has been
successfully established.
The Media Server software
will then display the Serial
No. and URL of your
SMCWMR-AG.
9 10
2
Configuration
Introduction
Step 2
Step 5
Step 6
Step 7a
Step 7b