Siemens Gigaset 4015 - Manual (Page 62)

58
Press keys:
Connecting the base station to a PABX
Gigaset 4015 Classic, GBR, A31008-G4015-B101-1-7619 anlagen.fm 17.09.01
Switching temporarily to tone dialling
If your PABX still operates with dial pulsing (DP) but
tone dialling (DTMF) is required (e.g. to check the mail-
box), you must switch to tone dialling (DTMF) during
the call.
Prerequisite: You are conducting a call!
OOOOOOOOOOOO
MENU Open the menu.
OOOOOOO OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO OOOOOOO 
TEMP TONE

Select the menu item and confirm.
Tone dialling is active.
Setting pauses
Pause after line seizure
With this function you can set the length of the pause
inserted automatically after pressing the talk key

before transmitting the telephone number.
OOOOOOOOOOOO
MENU Open the menu.
361
Initiate the setting.
OOOOOOO
p. ex.
 
Enter the pause length and confirm.
1 second = 1; 3 seconds = 2; 7 seconds = 3;
2.5 seconds = 4.
The setting is saved.
Pause after recall key
With this function, you can set the length of the pause
that is inserted after holding down the
 - key.
OOOOOOOOOOOO
MENU Open the menu.
36-
Initiate the setting.
OOOOOOO
p. ex.
 
Enter the pause length and confirm.
1
= 800 ms; 2 = 1600 ms; 3 = 3200 ms
The setting is saved.