Sony PCWA-C300S - Manual (Page 48)

48
6
Double-click “Sony 802.11g Wireless LAN Adapter”.
The “Sony 802.11g Wireless LAN Adapter Properties” dialog box
appears.
Note
The Wireless LAN PC Card is not working properly in the following cases:
• “Sony 802.11g Wireless LAN Adapter” is shown with an “X” or “!” symbol.
c Right-click “Sony 802.11g Wireless LAN Adapter” and click “Remove” to
uninstall the driver. Then repeat the installation process.
• Double-clicking “Network Adapters” does not display “Sony 802.11g Wireless
LAN Adapter”.
c Remove the Wireless LAN PC Card. Then repeat the installation process.
• Double-clicking “Other devices” displays “Ethernet Controller”.
c Right-click “Ethernet Controller”, then click “Remove” to uninstall the driver.
Repeat the installation process.
7
Confirm that the message “This device is working properly.”
is displayed under “Device status”.
Note
If “This device is working properly.” is not shown, the Wireless LAN PC Card is not
working correctly. Perform steps 1 - 5, right-click “Sony 802.11g Wireless LAN
Adapter”, then click “Remove” to uninstall the driver. After uninstalling, restart the
computer and repeat the installation process.