Specifying the speaker parameters – Sony HT-SL40 User Manual

Page 15

Advertising
background image

15

GB

HT-SL55 4-247-583-12(1) GB

Hooking Up and Setting Up the Speaker System

continued

Specifying the speaker
parameters

1

Press MAIN MENU repeatedly to select
the “

SET UP

”.

2

Press V

or v to select the parameter

you want to adjust.

3

Press B

or b to select the setting you

want.

The setting is entered automatically.

4

Repeat steps 2 to 3 until you have set
all of the parameters that follow.

Initial settings

Parameter

Initial setting

L

R

DIST. X.X m

3.0 m

C

DIST. X.X m

3.0 m

SL

SR

DIST. X.X m

3.0 m

SL

SR

PL. XXXX

LOW

x Front speaker distance

(

L

R

DIST. X.X m)

Set the distance from your listening position to
the front speakers (A on page 14).

x Center speaker distance

(

C

DIST. X.X m)

Set the distance from your listening position
to the center speaker. Center speaker distance
should be set from a distance equal to the front
speaker distance (A on page 14) to a distance
1.5 meters closer to your listening position
(B on page 14).

x Surround speaker distance

(

SL

SR

DIST. X.X m)

Set the distance from your listening position to
the surround speakers. Surround speaker
distance should be set from a distance equal to
the front speaker distance (A on page 14) to a
distance 4.5 meters closer to your listening
position (C on page 14).

Tip

The receiver allows you to input the speaker position
in terms of distance. However, it is not possible to set
the center speaker further than the front speakers.
Also, the center speaker cannot be set more than
1.5 meters closer than the front speakers.
Likewise, the surround speakers can not be set further
away from the listening position than the front
speakers. And they can be no more than 4.5 meters
closer.
This is because incorrect speaker placement is not
conducive to enjoy surround sound.
Please note that, setting the speaker distance closer
than the actual location of the speakers will cause a
delay in the output of the sound from that speaker. In
other words, the speaker will sound like it is further
away.
For example, setting the center speaker distance
1–2 m closer than the actual speaker position will
create a fairly realistic sensation of being “inside” the
screen. If you cannot obtain a satisfactory surround
effect because the surround speakers are too close,
setting the surround speaker distance closer (shorter)
than the actual distance will create a larger sound
stage.
Adjusting these parameter while listening to the
sound often results in much better surround sound.
Give it a try!

GB04SPK_HT-SL55.p65

28/4/2003, 11:58 AM

15

Advertising
This manual is related to the following products: