Samsung DynaFlat TX R2765 - Manual (Page 16)

I N S TA L L AT I O N
16
ANT IN
3
Connect an S-video
cable between the
S-VIDEO OUT jack on
the VCR and the
S-VIDEO INPUT
jack on the TV.
An S-video cable is usually included with an S-VHS VCR (If not, check your local
electronics store.)
Make sure the jacks you are using are underneath the number “1.”
A
2
Connect a set of audio
cables between the
AUDIO OUT jacks on the
VCR and the 1 AUDIO
INPUT jacks on the TV.
1
To begin, follow steps
1–3 in the previous
section to connect the
antenna or cable to your
VCR and your TV.
Connecting an S-VHS VCR
Your Samsung TV can be connected to an S-Video signal from an S-VHS VCR. (This
connection delivers a better picture as compared to a standard VHS VCR.)
ANT IN
VCR Rear Panel
Coaxial Cable
TV Rear Panel
VCR Rear Panel
Audio Cable
TV Rear Panel
VCR Rear Panel
Video Cable
TV Rear Panel