SonicWALL TZ 170 User Manual
Page 14
SonicWALL TZ 170 Wireless Getting Started Guide Page 13
PPPoE
The Setup Wizard screen should display:
WAN Network Mode - NAT with PPPoE Client
Click Next.
PPTP
The Setup Wizard screen should display:
WAN Network Mode - NAT with PPTP Client
Click Next.
Obtain an IP Address
Automatically
Select this if your ISP assigns you a dynamic IP address.
Use the following
IP Address
Select this if your ISP has assigned you a static IP address,
and enter the address.
PPPoE User Name
Enter the user name for your Internet account. Your ISP may
require you to enter your username in e-mail address format,
including “@” and the domain name, for example,
[email protected].
PPPoE Password
Enter the password for your Internet account.
Inactivity Disconnect
(minutes)
Check this box if you want the SonicWALL TZ 170 Wireless
to disconnect from the Internet if there is no traffic for the
number of minutes you enter.
PPTP Server IP
Address
Enter the address of the PPTP server.
PPTP User Name
Enter your network user name.
PPTP Password
Enter your network password.
Obtain an IP Address
Automatically
Select this if the server assigns you a dynamic IP address.
Use the following
IP Address
Check this if you have been given a static IP address, and fill
in the following three fields.
SonicWALL WAN
IP Address
Enter the static IP address for your connection.
WAN Subnet Mask
Enter the subnet mask for your connection.
Gateway (Router)
Address
Enter the address of your Internet Gateway.