Sierra Wireless RAVEN 20080605 - Manual (Page 32)

Rev 1.0 Oct.09 26
5 5: Connecting the Raven XE
• ACEmanager
• Using a Terminal
Application with AT
Commands
• AT Command
With ALEOS as its “brain”, the Raven XE is a highly configu‐
rable device.
To configure your Raven XE, you have two options. You can
use the configuration and management applications of the
AceWare suite or you can use a terminal emulator application
such as HyperTerminal, PuTTY, or many others.
ACEmanager
To get a more expanded view of the other ACEmanager
features, refer to the ACEmanager Guide.
A full listing of all the configuration commands for you
modem are in
Chapter 6 .
Using a Terminal Application with
AT Commands
You can access and configure your Raven XE using a terminal
application such as Microsoft HyperTerminal, PuTTY, or
similar. The following directions are for HyperTerminal which
is part of a standard installation of Windows XP.
1. Choose a name and icon for your
connection.
a. Choose a name for your connection, such as Raven XE
or Sierra Wireless AirLink Solutions. The name and icon
are only for your own reference so you can find the
connection at a later date.
Tip: If you want to have a connection saved for both local and
remote, it is recommended the connection name reflect the
connection type, i.e. Raven XE local.
b. Select OK.