Sony CDP-CX250 - Manual (Page 6)

6
Getting Started
With the label side
facing right
After inserting the disc, you can input the original
disc titles instead of the disc numbers (see
“Labeling Discs” on page 17) to locate it easily
when you start playing.
5 Repeat Steps 3 and 4 to insert more discs.
ALL DISC S
CD1
DISC
Symphony No1
2O
Inserting CDs
You can insert up to 200 discs into this player.
POWER Front cover JOG
3 Turn the JOG dial until you find the disc slot
where you want to insert a disc, while checking the
disc number (written beside every five slots and
also indicated in the display).
The disc number at the loading position appears in
the display.* If the disc has the Disc Memo (see
page 17), the Disc Memo appears instead of the
disc number. As you turn the JOG dial, the disc
number or the Disc Memo changes.
1
Press POWER to turn on the player.
2
Press OPEN.
Front
cover
OPEN
Rotary table
Loading position
Playing position
Disc slot at the loading position
Disc number
Disc number or the Disc Memo
Disc number
ALL DISC S
CD1
DISC
*DISC-2O*
2O
* If you have already inserted discs, the disc number at
the playing position appears. When you turn the JOG
dial, the displayed disc number changes to the one at
the loading position.
4
Insert a disc with the label side facing right.
Notes
• Make sure you have inserted the disc into each slot at
a right angle to the rotary table. If the disc is not put
in straight, it may damage the player or the disc.
• Make sure the rotary table comes to a complete stop
before inserting or removing discs.