Sony Ericsson GS64 - Manual (Page 26)

LZT 123 1836 26
5 System Connector Interface
5.1 Overview
Electrical connections to the wireless modem (except the antenna), are made through
the System Connector Interface. The system connector is a 100-pin, narrow (0.5 mm)
pitch device designed for board-to-board connectivity.
Figure 5.1-1 below shows the numbering of the connector pins.
Pin 100
Pin 99
Pin 2
Pin 1
Pin 100
Pin 99
Pin 2
Pin 1
Figure 5.1-1 Wireless modem, viewed from underneath
A mating (host circuit board) connector can be obtained from
Panasonic by ordering the following part
100 PIN SOCKET AXK5F00547YG
The following table gives the pin assignments for the system connector interface and
a short description for each signal.
TIP