Sangean PT 10 - Manual (Page 8)

7
Stereo/mono reception (with earphones only)
However, if the signal from the FM stereo station is weak, you can improve the sound
quality by switching to mono reception.
1 Press » STEREO MONO « (on the left of the device) to switch to mono.
– The stereo LED goes out.
2 Press » STEREO MONO « (on the left of the device) to switch to stereo.
– The stereo LED lights up when a stereo channel is received.
Short wave reception
Your radio can receive signals in a number of frequency bands. It does not take long to get
used to tuning to FM and MW stations, since these stations are always at the same places
on the tuning scale because they broadcast at fixed wavelengths and frequencies.
Unfortunately, this is not always the case with short wave stations. Due to atmospheric
conditions, short wave stations must frequently broadcast on different wavelengths.
Most short wave bands are available all over the world and can be used by international
broadcasters. At present these are the only wavelengths which provide listeners with direct
reception over long distances. For this reason, short wave frequencies are not only used by
radio stations, but also by other users such as amateur radio enthusiasts, shipping, aircraft
and radio navigation systems.
OPERATION ____________________________________________________________
02 Yacht Boy 10, GB 19.08.2003 13:45 Uhr Seite 20