Sony Z300i User Manual
Page 8
7
1
Remove the battery cover as shown in the picture.
2
Insert the SIM card. Make sure the SIM card is placed
under the silvery holders.
3
Place the battery on the back of the phone with the label
side up and the connectors facing each other.
4
Place the battery cover as shown in the picture and slide
it into place.
5
Connect the charger to the phone at the flash symbol.
The flash symbol on the charger plug must face upwards.
6
It may take up to 30 minutes before the battery icon
appears on the screen.
7
Wait approximately 4 hours or until the battery icon
indicates that the battery is fully charged. If you do not
see the battery icon after this time, press any key to
activate the screen.
8
Remove the charger by tilting the plug upwards.
PIN
You may need a PIN (Personal Identification Number) to
activate the services in your phone. Your PIN is provided
by your network operator.
If you make a mistake while entering your PIN, delete
the number by pressing
.
You must reset the time and date when you remove
the battery.
If you enter the wrong PIN three times in a row, the
SIM card is blocked and the message PIN blocked
appears. To unblock it, you need to enter your PUK
This is the Internet version of the user’s guide © Print only for private use.