Sirius Satellite Radio XM Dock & Play XADH1 - Manual (Page 20)

20
observe if the signal strength increases . For each tweak, allow a few seconds in
each position to determine if the signal strength increases .
If the signal reception is good, but there is no audio, verify your audio connection .
• If you are connected to a home stereo system, be sure the system is set to
the auxiliary input source, and you have connected the Stereo Audio Cable
to the auxiliary input connectors .
• If you are connected to powered speakers, be sure the speakers are
plugged into an outlet, and are turned On .
The audio level of your radio can also be increased . Refer to the User Guide which
accompanied your radio and increase the audio level .
If you still have questions, for example, ‘Are there any other options/things I
should consider?’, etc ., refer to “Troubleshooting” on page 22 .
Home Installation
SOUTH