Stanton M304 - Manual (Page 6)

D E S C R I P T I O N O F F U N C T I O N S
18. Master output level - Controls the overall output level of the mixer.
19. Output meters - These LEDs let you know if the audio coming out
of the mixer is loud enough (or too loud!). If the LEDs reach the red,
the mixer is probably clipping, or distorting.
20. Input selectors - These toggle switches select the input source
between phono and line for each channel.
21. Input gains - Controls the input sensitivity level of each channel. An
LED meter is provided on each of the 3 channels for proper adjust-
ment of the levels.
22. Channel equalizer - Individual controls for high frequency,
midrange, and low frequency equalization with +9dB/Kill adjust-
ments. Note: Any changes made to EQ settings will change the over-
all output level.
23. Channel pans - Controls left/right output balance of each channel.