11 changing the sound and beep sound, Adjusting the sound characteristics, Attenuating the sound – Sony CDX-3250 User Manual

Page 11

Advertising
background image

11

Changing the sound and
beep sound

Boosting the bass sound — D-bass

You can enjoy a clear and powerful bass
sound.
The D-bass function boosts the low frequency
signal with a sharper curve than conventional
bass boost.
You can hear the bass line more clearly even
while the vocal volume remains the same. You
can emphasise and adjust the bass sound
easily with the D-BASS control.

Adjusting the bass curve

Turn the D-BASS control to adjust the
bass level (1, 2, or 3).
“D-BASS” appears in the display.

To cancel, turn the control to OFF.

Note
If the bass sound becomes distorted, adjust the
D-BASS control or volume.

Attenuating the beep sound

Press (6) while pressing (SOUND).

To obtain the beep sound again, press these
buttons again.

Note
If you connect an optional power amplifier and do
not use the built-in amplifier, the beep sound will
be disabled.

Level

Frequency (Hz)

0dB

D-BASS 3

D-BASS 2

D-BASS 1

Adjusting the sound
characteristics

You can adjust the bass, treble, balance, and
fader. You can store the bass and treble levels
independently for each source.

1

Select the item you want to adjust by
pressing
(SOUND) repeatedly.

VOL (volume) n BAS (bass) n TRE (treble)
n BAL (left–right) n FAD (front–rear)

2

Adjust the selected item by rotating the
dial.
Adjust within three seconds after selecting
the item. (After three seconds, the dial
function reverts to volume control.)

Attenuating the sound

Press (ATT) on the optional rotary
commander.
“ATT-ON” flashes momentarily.

To restore the previous volume level, press
(ATT) again.

Tip
The unit decreases the volume automatically when
a telephone call comes in (Telephone ATT
function).

Advertising