SoundGate CRZNAUX2 - Manual

3 2
www.soundgate.com
Rev 20080404
CRZNAUX2
If you experience problems, call SoundGate Technical Support
at +1-800-256-0808, or email us at [email protected].
Purpose
The SoundGate CRZNAUX2 lets you connect a Zune TM digital media
player directly to the factory radio in the Chrysler Corporation
vehicles listed below. The CRZNAUX2 supplies power, charges, and
provides direct audio input for your Zune Device
Features
The SoundGate CRZNAUX2 utilizes sophisticated microprocessor
control, ultra-reliable surface-mount construction, and advanced software design to fl awlessly
integrate with Chrysler audio systems. Your Zune device’s audio can be selected from your factory
radio’s controls. An optional remote control (sold separately) allows control of all Zune device
functions.
The CRZNAUX2 works in the following vehicles:
CHRYSLER
300M 1999–2004
Concorde 1998–2004
LHS 1999–2003
PT Cruiser 2000–2005
Sebring 2001–2006
Town and Country Van 2001–2006
DODGE
Dakota 2001–2004
Durango 2001–2003
Grand Caravan 2001–2006
Intrepid 1998–2004
DODGE (CONTINUED)
Neon / SRT 2000–2005
Ram Pickup 1500/2500/3500 2002–2005
Stratus 2001–2005
JEEP
Grand Cherokee 1999–2004
Liberty 2002–2005
Wrangler 2003–2005
PLYMOUTH
Prowler 2002
WARNING
DO NOT DISASSEMBLE OR ALTER
Doing so may result in an accident, fi re, or electric shock.
Do not block your view
Do not mount product or any added audio/video equipment where it can block your view through the windshield or block your view
of dashboard indicators and displays.
Do not block safety devices
Do not mount product or any added audio/video equipment where it can obstruct the operation of any safety device, such as the
airbag.
Distraction warning
Do not allow product or any added audio/video equipment to distract you while you are driving.
BEFORE WIRING, DISCONNECT THE CABLE FROM THE NEGATIVE BATTERY TERMINAL
Before starting any installation work , wait 90 seconds after turning the ignition switch to the LOCK position and disconnecting the negative (-) terminal from the battery. The
supplemental restraint system (SRS), or airbag(s) is equipped with a backup power source. If installation work is started less than 90 seconds after disconnection of the negative
(-) battery terminal, the SRS may deploy. When the negative (-) terminal cable is disconnected from the battery, the clock and audio systems’ memory may be erased. Before
starting installation work, make a record of the clock and audio systems’ memory settings. When installation is complete, reset the clock and audio systems to their previous
settings. Power tilt, power telescopic steering column, power seats, power mirrors, power shoulder belt anchorage, and other power accessories may or may not be equipped
with a memory function; consider keeping a record of these settings as well.
When installation is complete, readjust the features to their previous settings.
Never use a backup power supply (such as another battery) during installation work in an attempt to avoid losing these memory settings.
CAUTION
DO NOT ALLOW CABLES TO BECOME ENTANGLED IN SURROUNDING OBJECTS
Cables or wiring that obstruct or get caught on places such as the steering wheel, shift lever, brake pedals, etc. can be extremely
hazardous.
DO NOT INSTALL IN LOCATIONS WITH HIGH MOISTURE OR DUST
Moisture or dust may result in product failure.
HAVE THE WIRING AND INSTALLATION DONE BY EXPERTS
The wiring and installation of this product requires special technical skills and experience.
USE ONLY SPECIFIED ACCESSORY PARTS
Use of other than specifi ed parts may damage product internally.
FOLLOW THE OPERATIONAL AND INSTALLATION MANUALS.
YOU SHOULD READ AND FAMILIARIZE YOURSELF THOROUGHLY WITH THE FOLLOWING INFORMATION PRIOR TO INSTALLING AND
USING THIS UNIT. IN ADDITION, YOU MUST CAREFULLY READ AND FOLLOW THE INSTALLATION SCHEMATICS AND INSTRUCTIONS
FOR THE PRODUCT AND THE VEHICLE IN WHICH IT IS BEING INSTALLED. FAILURE TO FOLLOW INSTALLATION INSTRUCTIONS MAY
DAMAGE THE PRODUCT AND THE VEHICLE, WILL VOID THE PRODUCT WARRANTY, AND MAY VOID THE VEHICLE WARRANTY.
CHECK YOUR LOCAL LAWS
Some States/Provinces or other governmental jurisdictions (such as cities) may have laws that prohibit the operation of a video
screen within the sight of the driver. If you have purchased such a product, you should use the product only in locations where it is
legal to do so, and if you do use the product, set up the screen so it is only visible to passengers.
TROUBLESHOOTING
Should this product fail to operate properly, please contact your Dealer or SoundGate Technical Support via email at
[email protected] or via phone at +1-800-256-0808.
CRZNAUX2 Overview
Optional remote control (available
separately). Allows full control of a
connected Zune device’s functions.
Inline fuse. The red wire of the power connector is fused
to protect your Zune device and vehicle systems. This wire
requires a 12V, 1500mA fuse.
Power connector. Connect black wire to bare-
metal chassis. Connect red wire to a +12V
switched (ignition) power source.
Zune Dock Connector. Connect to
Zune
TM digital media player.
RCA component A/V outputs. Connect the audio outputs to the matching locations of the CRZNAUX2
components on the next page.
Yellow = Video
Red = Audio Right
White = Audio Left
Connect the RCA Left (white) and Right (red) audio cables (from the component-set on page 2) to the CRZNA
UX2 module.
CRZNAUX2 Module
8-pin Male DIN Connector and +12V Constant
Wir
e.
Only one of the
harnesses shown should be used.
See the instructions on page 4 for
installation details.
10-pin Male Connector
.
Only one of the harnesses
below should be used.
See the instructions on page 4 for
installation details.
CRZNAUX2 Har
ness Option B
CRZNAUX2 Har
ness Option
A