6location and function of parts and controls – Sony Ericsson TU-1041U User Manual

Page 6

Advertising
background image

6

Location and Function of Parts and Controls

Remote Commander

1

MTS/MPX button
This button works in the same manner as the MTS
button on the tuner.
Press this button to switch the reception modes of the
tuner. Each time you press this button, the reception
mode switches in order of main, monaural, SAP, and
back to main.
When the tuner is in the stereo mode, press this button
to switch between stereo and monaural.

2

0-9 buttons
These buttons work in the same manner as the 0-9
buttons on the tuner.
Use these buttons to select a channel.

3

CH button
This button works in the same manner as the ENTER
button on the tuner.
Press this button to tune in the selected channel.
To select channel 14, for example, press 1

n

4

n

CH.

4

CH +/– buttons
Use these buttons to scan channels.

• The buttons other than those described above function

only when other Sony equipment is connected to the
CONTROL S OUT jack on the tuner. Refer to the
operating instructions of the equipment for the button
operations.

• If a cable is connected to the CONTROL S IN jack on the

tuner, the tuner's remote commander will not work.

Notes

Inserting batteries

Insert two size AA (R6) batteries (supplied) by matching
the + and – on the battery to the diagram inside the battery
compartment.

Notes

• Under normal conditions, batteries will last up to six

months.
If the remote commander does not operate properly, the
batteries may be worn out. When replacing batteries,
replace both of them with new ones.

• Do not mix old batteries with new ones or mix different

types of batteries together.

• If the electrolyte inside the battery should leak, wipe the

contaminated area of the battery compartment with a
cloth and replace the old batteries with new ones. To
prevent the electrolyte from leaking, remove the
batteries when you do not plan to use the remote
commander for a long period of time.

• Do not handle the remote commander roughly. Do not

drop it, step on it or let it get wet.

• Do not place the remote commander in direct sunlight,

near a heater, or where the humidity is high.

]

}

}

]

2

5

8

ZOOM

DISPLAY

RGB2

Y/C

SELECT

VOL

3

6

9

CH

DEGAUSS

POWER

YUV

MTS/MPX

CH

1

4

7

10/0

STILL

MUTING

RGB1

LINE

MENU

ENTER

ON

OFF

ON

POWER

ID MODE

SET

OFF

Advertising