Silvercrest KH 2337 - Manual (Page 9)

- 7 -
Selecting an album (MP3 only)
With MP3 CDs you can select, if available, between
the different albums.
• Press the
ALBUM button repeatedly until the desired
album number is shown in the display.
• Playback starts automatically with the first title of
the selected album.
Title fast forward/backward
• During playback press one of the buttons SKIP -
and SKIP + .
• Keep this button pressed until the desired point
in the title has been reached.
Repeat function (REPEAT)
With the repeat function you can repeatedly play-
back indivdual titles of a CD or all of them.
• To repeat individual titles press the
MODE button.
In the display appears REP.
• To repeat all titles from a CD press the
MODE button
once more.
In the display appears REP ALL.
• To end repeat playback press the
MODE button
repeatedly until the notice REP ALL goes out.
Repeat album (MP3 only)
With MP3 CDs you can, if available, repeat play-
back albums.
• To repeat an entire album press repeatedly the
MODE button until REP ALBUM appears in the dis-
play.
• Select, with the buttons SKIP+ or SKIP - , the de-
sired album number.
• Playback starts automatically with the first title of
the selected album.
• To end repeat playback press the MODE button re-
peatedly until the notice REP ALBUM goes out.
Random playback (RANDOM)
With the random playback function you can play-
back individual titles on a CD in random order.
• To playback individual titles in any desired order
press the MODE button repeatedly until RAND
appears in the display.
• To end random playback press the MODE button
repeatedly until the notice RAND goes out.
Programme playing order
You can programme a playback order for up to
20 titles of an audio CD and/or 99 titles of an MP3
CD, in which the titles of a CD are to be played
back. This is only possible when the play function
has been stopped
• Press the
PROGRAM button. The notice PROG
blinks.
In the display appears the notice P01 for the pro-
gramme slot, whose title shall be the first to play-
back when playback starts.
• Select, with the buttons
SKIP - and SKIP + , the de-
sired title for the programme slot.
• To save the setting press the PROGRAM button.
In the display is shown the notice P02 for the pro-
gramme slot 2.
• To programme in further tracks, repeat the steps
described above.
When all programme slots are occupied FUL will be
shown in the display.
• You start programmed playback by pressing the
PLAY/PAUSE button. The notice PROG appears
permanently.
The programmed title sequence is erased
when...
- You, during playback, press the STOP button twice.
The notice PPR RO OG G goes out
- You open the CD compartment.
- The device is switched off and then back on.
IB_KH2337_DT46705_LB6 24.02.2010 10:35 Uhr Seite 7