Sony MINIDISC - Manual (Page 22)

Booklet
A A D D C C D D
A U S T R I A
20
• The catalogue number must appear on the cover
of the booklet
• All pages (except cover outside) must contain
page numbers.
• Please prepare the film layout in such a way that
the booklet is closed on the left-hand side.
• Please enclose compulsory proofs regarding
colour with all films.
• Please identify each film with colour specifcation.
II. a) Artwork Films (Booklet)
The booklet contains similar information as CD
booklets. Optionally the MiniDisc logo can be
inserted. During preparation of the print films for
the booklet please mind the following:
• Send coated positive offset films with approx.
3mm bleed only; the registration and cutting
marks must be located outside the bleed.
• The films must not reveal damage of any kind and
must be packed in such a way so as to prevent
folding or creasing (roll container or carton).
72.7
104.9
min 10
stitching wire or
non-corrosive staples
All dimensions in mm with a tolerance of ± 0.2 mm
DADC will provide artwork in following quality:
Thickness:
max. 1.8 mm measured on folding side.
max. 2.3 mm measured above the stitching wire.
With 70g / m
2 paper quality for inner pages this will allow a max. of 32 pages.
Coverpages:
wood-free art paper.
min. 180g/m
2 , coated on both sides (for booklet cover and one sheet booklet).