Solving common problems – Samsung AFPCC052CA0 User Manual

Page 33

Advertising
background image

Before contacting the after-sales service, perform the following simple checks.
They may save your time and expense of an unnecessary call.

Explanation/Solution

Check that the breaker used for the air conditioner is switched on.

Problem

The air conditioner does not
operate at all

Check that there are no obstacles between you and the remote

control sensor.

Check the wireless remote controller batteries (Refer to page 10).

Check that you are close enough to the remote control sensor.

(seven metres/yards or less).

Check that you are pointing the remote controller at the remote

control sensor on the indoor unit.

Replace the remote controller batteries if necessary.

If there is a strong light around the air conditioner, a
three-wavelength light, a neon sign, etc., for example,

the air conditioner may not be operated with a remote controller.
If this happens, use the remote controller close by the remote
control sensor.

Check that the correct operating mode has been selected.

The room temperature may be too low or too high.

Dust may be blocking the air filter guard; refer to page 31

for cleaning instructions.

Check that there is no obstacle in front of the outdoor unit.

The air conditioner does not
operate with the remote
controller

Wireless Remote Controller

Wireless Remote Controller

No beep is heard when you
press (ON/OFF) on the
remote controller

The air conditioner does
not cool or heat

is displayed on the wired remote controller. In this case,

turn the air conditioner off and contact your dealer.

Wired Remote Controller

The air conditioner does not
operate with the remote
controller

In case of using the wired remote controller for a group, the air

conditioners connected to the remote controller are turned on/off in
order. Thus, it takes some time(up to 32 seconds).

Wired Remote Controller

When turning on/off the
air conditioner, it is not
turned on/off immediately.

Check that the required temperature has been set correctly.

Increase the fan speed.

When heating, the required
room temperature is never
reached and the air
conditioner frequently stops

E-

33

ENGLISH

Solving Common Problems

Advertising