Summit SM900WH User Manual

Page 14

Advertising
background image

13

Two-stage Cooking
Some recipes require different stages

of cooking at different temperatures.
1. SET STAGE 1:

Follow steps 1 and 2 in “One-

stage cooking.” DO NOT TOUCH

START/STOP PAD.

2. SET STAGE 2:

Touch COOK pad then enter proper

cooking time and (lower) power

level. (Most 2-stage recipes use

lower power for second stage.)

3. Touch START/STOP pad.
NOTE:

After total time has elapsed, 4 beeps

sound and END appears in display.

Touch RESET pad or open oven door

to clear END before starting another

cooking function.

SETTING “SPEED DEFROST”

1. Touch SPEED DEFROST pad.
2. Enter desired defrosting time by

touching correct number pads.

Digital timer sets minutes and

seconds from left to right so a single

digit can be set (5 for 5 seconds) or

up to 4 digits (2405 for 24 minutes

5 seconds).

3. Touch START/STOP pad.
NOTE:

• After time has elapsed, four beeps

sound and END appears in display.

Touch RESET pad or open door to

clear END before starting another

cooking function.

• After setting SPEED DEFROST, oven

can be programmed to automatically

switch to one or two-stage cooking.

A. For speed defrost and one stage

cooking, follow steps above.

Before touching START/STOP

pad, touch COOK pad, enter

time and power level. Then touch

START/STOP pad.

B. For speed defrost and two stage

cooking, follow steps above.

Before touching START/STOP pad,

enter two-stage cooking programs.

SETTING “COOK BY WEIGHT”

1. Touch COOK BY WEIGHT pad.
2. Enter the one-digit code by touching

the correct number pad.

3. Enter weight.
4. Touch START/STOP PAD.
NOTE:

• Your microwave oven makes cooking

easy. You set the type and weight

of food, and the oven automatically

sets the cooking time and power

level.

“COOK BY WEIGHT “ CODE

DESCRIPTIONS

CODE

TYPE

MAX WEIGHT

1

Beef

5 lb.

2

Mutton

5 lb.

3

Pork

5 lb.

• Meat must be defrosted and at

refrigerated temperature.

• Weight must be in pounds and

ounces. Ounce weights less than 10

must be proceeded by a 0. If label

gives weight in pounds only, change

the fraction of a pound to ounces

using the following chart.

English

English

Advertising
This manual is related to the following products: