Sangean RCR-10 - Manual (Page 31)

30
GB
Disabling / cancelling alarms
To disable an active alarm, either press and release the
Standby button, or press and hold the according alarm button to
cancel the alarm.
Snooze
1. When the alarm sounds, press any button other than the Standby
button will silence the alarm for 5 minutes. “SNOOZE’ will appear
on the display.
2. To adjust the silence time for the snooze timer, press and hold the
Info/menu button to enter the menu setting.
3. Rotate the Tuning control until “SNOOZE X” appears on
the display, then press and release the Tuning control to enter
the setting. Rotate the Tuning control to adjust the silence time
from 5, 10, 15 and 20 minutes for the snooze timer.
4. To cancel the snooze timer while the alarm is suspended,
press and release the Standby button.
3
2