Sony ICD-ST20 - Manual (Page 13)

Basic Operations
13 GB
DIRECTNL
Tips for Using the Built-in Microphone
To record a sound centering on a specific direction
• Adjust the position of the built-in microphone.
• To record a sound centering on a specific
direction, slide the DIRECTNL switch to “ON”
position. When you record a sound at a
conference/meeting or in a spacious place etc.,
use this setting.
Note
The DIRECTNL switch functions only in the “SP” or
“LP” recording mode. For details of recording
modes, see page 53.
To record a sound not centering on a specific direction (all-
directional recording)
Slide the DIRECTNL switch to “OFF” position.
To select the sensitivity of the built-in microphone
You can select the microphone sensitivity by setting the SENS (page 52) in
the menu according to the recording conditions:
• H (high): To record a small sound at a meeting or in a quiet and/or
spacious place.
• M (middle): To record at a meeting or in a quiet and/or small place.
• L (low): To record for dictation or in a noisy place.
You can change the SENS setting with the menu during recording .