Sony ICD-ST20 - Manual (Page 8)

8 GB
Step 2: Setting the Clock
You need to set the clock to use the alarm function or record the date and
time.
Clock setting display appears when you insert batteries for the first time,
or when you insert batteries after the unit has been without batteries for a
certain period of time. In this case, proceed from step 4.
1
Turn the jog lever toward
MENU.
The menu mode will be displayed in
the display window.
2
Press the jog lever up or down
(>/.) to select “SET DATE”.
3
Press the jog lever (x•B).
The date and time setting window is
displayed. The year digits will flash.
4
Set the date.
1
Press the jog lever up or down
(>/.) to select the digits of
the year.
Jog lever
Press the center
(x•B).
Press up (>).
Press down (.).
Turn toward MENU.