Sharp FODC525 - Manual (Page 126)

Installing the Printer Driver
124
4
Select “Create a new port” and select “Standard TCP/IP Port” from the list.
Click Next.
5
The “Add Standard TCP/IP Printer Port Wizard” will appear. Click Next.
6
Enter the IP address of the printer (the port name is filled in automatically).
•
If you need to check the IP address, follow the procedure in Printing out the
Network Settings on page 79.
Make sure that the printer has been turned on and has been configured for
network printing, and then click the Next button.
all.book Page 124 Thursday, May 13, 2004 8:51 AM