Sanus Systems VMPL2 - Manual

Sanus Systems 2221 Hwy 36 West, St Paul, MN 55113 USA •
USA Customer Service 1-800-359-5520 • www.sanus.com
VMPL2
Do not use this product for any purpose not explicitly specified by Sanus Systems.
Improper installation or use may cause personal injury and/or property damage. If
you do not understand these instructions, or if you have doubts about the safety of
the installation, contact Sanus Systems Customer Service. Sanus Systems is not liable
for injury or damage caused by incorrect installation or use.
CAUTION
This product contains small items that could be a choking hazard if swallowed.
Keep these items away from young children!
WARNING
Thank you for choosing the Sanus Systems Vision Mount wall mount. The Sanus Systems
VMPL2 wall mount is designed to support a monitor weighing up to 79 kg (175 lbs)
to a vertical wall either flat or at a fixed 5 degree tilt. Hardware for multiple mounting
configurations is included.
OPT
OPT
Hardware and procedures for multiple mounting configurations are included.
When you see this symbol, choose the correct configuration to suit your
needs. Not all hardware included will be used.
This product is not designed for use in steel stud walls or old cinder block walls. The
wall must be capable of supporting up to five times the weight of the monitor and
mount combined. If you are uncertain about the nature of your wall or its ability
to support the monitor, contact Sanus Systems Customer Service, or a qualified
contractor.
CAUTION
(6901-100135 <01>)