Samsung 29Z6 - Manual (Page 22)

22
ENG
Your television has several settings which allow you to control
picture quality.
1 Press the MENU button.
Result: The options available in the Picture group are
displayed.
2 Press the - or + button.
3 Press the or button to select Adjust.
4 Press the - or + button.
Result: The options available in the Adjust group are
displayed.
➣
You can also display this group simply by pressing the
P.MENU (Picture Menu) button.
5 Press the or button to select the option (Contrast ,
Brightness , Sharpness, Color, Color tone or Tint-NTSC only)
to be adjusted. Press the - or + button.
Result: The horizontal bar is displayed. Move the horizontal
bar’s cursor left or right by pressing the
- or + button.
➣
◆ If you make any changes to these settings, the picture
standard is automatically switched to Custom.
◆ The television has an “automatic degaussing” system
that is activated if magnetic interference is present.
To degauss the television screen, switch power off by
pressing the “
” (On/Off) button on the front panel.
(Refer to “Automatic Degaussing to Remove Colour
Patches” on page 42.)
Adjusting the Picture Settings
Contrast 100
Select Enter Exit
Picture
Mode
➛➛ Dynamic ❿❿
Adjust
❿❿
Scan mode : Natural
Digital NR : Off
Tilt : 0
LNA : Off
Select Adjust Exit
Adjust
Contrast : 100
Brightness : 50
Sharpness : 80
Color : 50
Color tone : 50
Color tone 50
Cool Warm