Smooth Fitness DMT X2 - Manual (Page 23)

www.smoothfitness.com 23
ASSEMBLY
STEP 5: Assemble the Handlebar
(A) Place the Nylon Bushing (706) into the Console Support Tube (101).
NOTE: THE EMBOSS SHAPE OF NYLON BUSHING MUST OUTWARD
TO HANDLEBAR.
(B) Assemble the Handlebar – Attach the Right (103) to the Console Support
Tube (101) with M8x20mm Allen Head Bolt (515), 8x14xT2.0mm Spring
Washer (514), and 8x27x2mm Metal Washer (513) 8x27x1mm Plastic
Washer (520). Tighten bolt and then press the Action Handlebar Cap
(707) into the Handlebar.
(C) Connect the Hand Pulse Sensor Wire – Middle (608) to the Console
Housing – Bottom (307)
(D) Repeat the above procedure to assemble the left side.
706 X2
513 X2
514 X2
515 X2
520 X2
707 X2
513
515
707
514
103
706
101
307
103
608
706
520