SMC Networks Barricade SMC7004ABR - Manual (Page 30)

I
NSTALLATION
2-10
Verify Port Status
Check the power and port indicators as shown in the following table.
LED Condition Status
Power
(Green) On Barricade is receiving power.
WAN
(Green) On The WAN port has established a valid network
connection.
Flashing The WAN port is transmitting or receiving
traffic.
Link/Act
(Green) On The indicated LAN port has established a valid
network connection.
Flashing The indicated LAN port is transmitting or
receiving traffic.
10/100
(Amber) On The indicated LAN port is operating at 100 Mbps.
Off The indicated LAN port is operating at 10 Mbps.
FDX/
COL
(SMC7008
ABR) On The indicated LAN port is operating in
full-duplex mode.
Flashing A collision occured on the indicated LAN port.