Sony BDP - S1E - Manual (Page 17)

17
Getting S
tarted
If you want to control your TV with the
supplied remote
You can control the volume, input source, and power switch of
your Sony TV with the supplied remote.
To control other TVs with the remote
You can control the volume, input source, and power switch of non-
Sony TVs as well.
If your TV is listed in the table below, set the appropriate
manufacturer’s code.
1
While holding down TV [/1, press the number
buttons to select your TV manufacturer’s code
(see the table below).
2
Release TV [/1.
◆Code numbers of controllable TVs
If more than one code number is listed, try entering them one at
a time until you find the one that works with your TV.
◆To return the remote to its default settings
1
Remove the batteries from the remote.
2
Re-insert the batteries while pressing down 1, 2,
and 3 of the number buttons.
3
Wait for a few seconds.
Note
Depending on the connected unit, you may not be able to control your
TV using all or some of the buttons on the supplied remote.
By pressing You can
TV [/1 Turn the TV on or off.
2 +/– Adjust the volume of the TV.
t Switch the TV’s input source between the
TV and other input sources.
PROG +/– Select the channel up and down.
% Mute the sound (for Sony TV only).
DISPLAY DIMMER
CLEAR
1 2 3
4 5 6
7 8
0
9
AUDIO SUBTITLE ANGLE
PLAY MODE
PROG
VIDEO
FORMAT
RED GREEN BLUE YELLOW
TOP
MENU
SYSTEM
MENU
POP UP/
MENU RETURN
TV
Number
buttons
%
TV \/1
t
PROG +/–
2 +/–
Manufacturer Code number
Sony 01 (default)
Aiwa 01
Grundig 11
Hitachi 23, 24, 72
Loewe 06, 45
Nokia 15, 16, 69, 73
Panasonic 17, 49
Philips 06, 07, 08, 23, 45, 72
Saba 12, 13, 36, 43, 74, 75
Samsung 06, 22, 23, 71, 72
Sanyo 25
Sharp 29
Telefunken 12, 13, 36, 43, 74, 75
Thomson 12, 13, 43, 74, 75
Toshiba 38
LG 06
JVC 33