Maintenance – Smooth Fitness 4.25 User Manual

Page 17

Advertising
background image

17

4.25 MOTORIZED TREADMILL

Visit us at: www.smoothfitness.com

MAINTENANCE

CLEANING

:

Routine cleaning of your treadmill will extend the product's life.

Warning: To prevent electrical shock, be sure the power to the treadmill is OFF and the power cord

is unplugged from the wall electrical outlet before attempting any cleaning or maintenance.

Important: Do not use abrasives or solvents to clean the treadmill. To prevent damage to the

computer, keep liquids away and keep it out of direct sunlight.

After each workout: Wipe off the console and other treadmill surfaces with a clean, water

dampened soft cloth to remove excess perspiration.

Weekly: Use of a treadmill mat is recommended for ease of cleaning. Dirt from your shoes contacts

the belt and eventually makes it to underneath the treadmill. Vacuum underneath treadmill once a

week.


DECK LUBRICATION

:

The walking belt has been pre-lubricated at the factory. However, it is recommended that the walking board be

checked periodically for lubrication to ensure optimal treadmill performance. Your treadmill should not have to be

lubricated usually within the first 400 hours of use.

Every 2 months of operation lift the sides of the walking belt and feel the top surface of the walking board as far

as you can reach. If you feel signs of silicone, no further lubrication is required. If it feels dry to the touch, follow

the instructions below.


To purchase lubricant kit please contact Smooth Fitness 1-888-800-1167

To apply lubricant to the walking belt

:

1. Position the walking belt so that the seam is located on top and in center of the walking board.
2. Insert the spray nozzle into the spray head of the lubricant can.

3. While lifting the side of the walking belt, position the spray nozzle between the walking belt and the board

approximately 6" from the front of the treadmill. Apply the silicone spray to the walking board, moving

from the front of the treadmill to the rear. Repeat this on the other side of the belt. Spray approximately

1/4 bottle (supplied with treadmill) each side..

4. Allow the silicone to "set" for 1 minute before using the treadmill.

Apply from front to back.

Advertising