Selecting the speaker system, Recording, Selecting the speaker system recording – Sony STR-DA2100ES User Manual

Page 46

Advertising
background image

masterpage:Left

lename[E:\SEM_Janet\Revision

Data\J9050000_2580805131DA2100ES_US\2580805131\US070TH_STR-DA2100ES-U.fm]

46

US

model name1[STR-DA2100ES]

[2-580-805-13(1)]

You can select the front speaker system you
want to use.

Press SPEAKERS (OFF/A/B/A+B)
repeatedly to select the front speaker
system you want to use.

The selected speaker system appears in the
display. To turn off the speaker output, press
SPEAKERS (OFF/A/B/A+B) repeatedly until
the “SP.A” and “SP.B” indicators in the display
turn off.

The speaker system

• SP.A

The speakers connected to the SPEAKERS
FRONT A terminals.

• SP.B

The speakers connected to the SPEAKERS
FRONT B terminals.

• SP.A and SP.B

The speakers connected to both the
SPEAKERS FRONT A and B terminals
(parallel connection).

Before you begin, make sure you have
connected all components properly.

Recording on an audio tape or
MiniDisc

You can record on a cassette tape or MiniDisc
using the receiver. See the operating instructions
of your cassette deck or MD deck if you need
help.

1

Select the component to be recorded.

2

Prepare the component for playing.

For example, insert a CD into the CD
player.

3

Insert a blank tape or MD into the
recording deck and adjust the
recording level, if necessary.

4

Start recording on the recording deck,
then start playback on the playback
component.

Notes

• You cannot record a digital audio signal using a

component connected to the analog MD/TAPE OUT
jacks. To record a digital audio signal, connect a
digital component to the DIGITAL OPTICAL MD/
TAPE OUT jacks.

• Sound adjustments do not affect the signal output

from the MD/TAPE OUT jacks.

• The analog audio signals of the current input is

output from the MD/TAPE OUT jacks.

• The signals input to the MULTI CH IN jacks are not

output from the MD/TAPE OUT jacks even when
MULTI CH IN is being used. The analog audio
signals of the current or previously used input are
output.

• Some sources contain copy guards to prevent

recording. In this case, you may not be able to record
from the sources.

Selecting the speaker
system

Recording

US01COV_STR-DA2100ES-U.book Page 46 Wednesday, July 13, 2005 2:17 PM

Advertising